Popis
HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+ Switch +
I/O ports and slots
48 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)
2 SFP+ fixed 1000/10000 SFP+ ports
2 RJ-45 1/10GBASE-T ports
Additional ports and slots
1 RJ-45 console port to access limited CLI port
Physical characteristics
Dimensions
17.32(w) x 16.54(d) x 1.73(h) in (44 x 42 x 4.4 cm) (1U height)
Weight
15.43 lb (7 kg)
Memory and processor
128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
Performance
100 Mb Latency
< 5 µs
1000 Mb Latency
< 5 µs
10 Gbps Latency
< 1.5 µs
Throughput
up to 130.9 Mpps (64-byte packets)
Routing/Switching capacity
176 Gbps
Routing table size
32 entries (IPv4), 32 entries (IPv6)
MAC address table size
16384 entries
Reliability
MTBF (years)
26.8
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative humidity
10% to 90%, noncondensing
Nonoperating/Storage temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Low-speed fan: 47.3 dB, High-speed fan: 50.0 dB; ISO 7779 Dual speed fan
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 – 240 VAC, rated
(depending on power supply chosen)
Maximum power rating
470 W
PoE power
370 W PoE+
Notes
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).
When supplemented with the use of an HP RPS1600 Redundant Power System, up to 800W of PoE+ can be supplied. Unit max. power consumption with RPS is 910W.
Safety
UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1
Emissions
FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2 2000, 61000-3-3; ICES-003 Class A
Management
IMC – Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager; HTTPS; RMON1; FTP;; Supported by HP IMC and generic SNMP management platforms. Refer to documentation for MIB support details.
Notes
Transceivers under accessories are recommended versions. Here is the list of fully supported transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9152A, J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.
Services
Refer to the HP website at www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
- Provedení: Rack mounted 19"
- Funkce: L3
- Technologie: Gigabit Ethernet + 10 GbE porty
- Počet portů LAN: 0
- Podporované standardy PoE: zadny
- PoE budget (W): 0
- Počet PoE Out portů: 0
- Počet SFP portů: 2
- Počet portů Combo: 0
- Počet portů SFP28: 0
- Počet portů QSFP28: 0
- Počet portů QSFP+: 0
- Ventilátor: ano
- Maximální počet portů: 24
- Přenosová rychlost LAN (Mb/s): 0
- Vlastnosti switche: Rozšiřitelnost
- Management: SNMP/RMON