Popis
HPE Networking Comware Switch 24G SFP w/8G Combo 4SFP+ EI 5140 JL826AR RENEW
HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A) |
||
I/O ports and slots |
16 SFP 100/1000 Mbps ports |
|
8 SFP dual-personality ports – 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports |
||
4 SFP+ fixed 1000/10000 SFP+ ports |
||
Additional ports and slots |
1 RJ-45 serial console port |
|
Power supplies |
2 power supply slots 1 minimum power supply required (ordered separately) |
|
Physical characteristics |
Dimensions |
17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height) |
Weight |
13.23 lb (6kg) |
|
Memory and processor |
512 MB SDRAM, 256 MB flash; |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) |
|
Performance |
IPv6 Ready Certified |
|
1000 Mb Latency |
< 5 µs |
|
10 Gbps Latency |
< 3 µs |
|
Throughput |
95 Mpps |
|
Routing/Switching capacity |
128 Gbps |
|
Routing table size |
1024 entries |
|
MAC address table size |
16384 entries |
|
Environment |
Operating temperature |
23°F to 113°F (-5°C to 45°C) |
Operating relative humidity |
10% to 90%, noncondensing |
|
Non-operating/Storage temperature |
-40°F to 158°F (-40°C to 70°C) |
|
Non-operating/Storage relative humidity |
5% to 95%, noncondensing |
|
Acoustic |
Low-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779 |
Electrical characteristics |
Frequency |
50/60 Hz |
Maximum heat dissipation |
102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC powered units heat dissipation is 130 BTU/hr min, 232 BTU/hr max. |
|
Voltage |
100 – 240 VAC -48 to -60 VDC |
|
Current |
5 A |
|
Maximum power rating |
60 W |
|
Idle power |
30 W |
|
Notes: |
– Idle power is the actual power consumption of the device with no ports connected. – Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. – Power Ratings for AC Power Supply indicated above. – For DC input power, Idle Power is 38W and Max is 68W. – DC Max input current is 8A. Units are supplied without a power supply. Customer must buy 1 or 2 JD362B (AC) or JD366B (DC) power supply. |
|
Safety |
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance |
|
Emissions |
FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 |
|
Immunity |
Generic |
EN 55024 |
ESD |
EN300 386 |
|
Management |
IMC – Intelligent Management Center; SmartMC;command-line interface; Web browser; SNMP Manager |
Ports
Throughput
Routing/switching capacity
PoE capability
Stacking capabilities
Management features
SmartMC
Command-line interface
Web browser
SNMP manager